 |
 | |
|
GO TO Protek Performance THE RV-7 AIRCRAFT BUILDING THE KIT e-mail: robert@protekperformance.com
OTHER USEFUL SITES Project started 8/15/01
|
AN6 to 5/16" Barb At the local AN fitting store I found a -6 brass insert that is normally used in a teflon hose fitting. This insert fits nicely into a -6 tube nut. It has a 3/4" long barb on one end with .345"OD. This fits nicely into the 5/16" EFI hose.  The other end of the brass fitting has a -6 female flare. Inserted into the -6 tube nut, this makes a nice adapter to the EFI hose.  Here is the finished product assembled with the crimp type EFI clamps supplied by Eggenfellner Aircraft.  |