6 cylinder EFI




Electronic Fuel Injection for H6 Subaru 6 cylinder engines
PN EFI6S

The EFI6S electronic fuel injection system for H6 Subaru 6 cylinder engines has been designed as a retrofit kit for Eggenfellner H6 aircraft engines. The EFI6S system has been custom tailored to the aircraft application and includes the wiring, sensors and EFI computer to update your engine to current standards. The EFI6S system has been premapped for proper fuel delivery and spark timing for the aircraft application.

The EFI6S system is fully compatible with normally aspirated or boosted engines. All EFI6S systems are mapped for boosted operation and do not require modification if you add a turbocharger or supercharger to your engine.

On early Eggenfellner H6 engine packages, the original Subaru EFI computer is an unmodifed car computer that has fixed fuel mapping that was designed around the needs and operating conditions of a car. The original computer also has lots of uneeded wiring harness complexity that originally connected to car systems which are not used in the airplane environment. The EFI6S system has been designed specically for the airplane environment with fuel mapping and wiring tailored directly to the airplane installation. The result is better fuel delivery across all flying operating conditions and a system which is physically simpler with only the required inputs and outputs for the airplane application.

The EFI6S wire harness is designed to fit your particular engine. Your original engine harness must be sent in to Protek so that we can use you original sensor and fuel injector connectors where applicable. You will receive a new custom harness with your kit that will plug into your existing ignition coils, fuel injectors, throttle position sensor, coolant sensor, and knock sensor.

The EFI6S uses a Hall effect digital crank sensor for accurate system timing. This consists of a new sensor that is mounted on the harmonic balancer (alternator side of the engine). This new mounting arrangement is very easy to install and inspect.

To get the most out of the EFI6S system, use the optional FIM-1 Fuel Injection Monitor and the WBM-1 Wide Band Air Fuel Ratio Monitor companion products.


(MORE INFO)


BACK

PROTEK PERFORMANCE Inc.
tel 951-317-3473 fax 909-363-7309 email: info@protekperformance.com